AirMini Cleaning

AirMini Support
AirMini Cleaning
Maintenance
Disassembly
For AirFit™ N20 users
- Disconnect the connector from the mask by pressing on its side buttons and pulling away.
- Disconnect the vent module from the AirMini tubing by twisting them away from each other.
- Disconnect the vent module from the mask tube by twisting them away from each other.
- If HumidX™ or HumidX Plus was used, remove it from the vent module.
For AirFit F20 users
- Disconnect the connector from the mask by pressing on its side buttons and pulling away.
- Disconnect the AirFit F20 connector from the AirMini tubing by twisting them away from each other.
For AirFit P10 for AirMini users
- Disconnect the vent module from the AirMini tubing by twisting them away from each other.
- Disconnect the vent module from the mask tube by twisting them away from each other.
- If HumidX or HumidX Plus was used, remove it from the vent module.
AirMini
- Disconnect the AirMini tubing by pressing on the side of the gray cuff and pulling away.
- Unplug the power supply unit from the power outlet and the machine.